Here, it is used TP-LINK Wireless and USB ADSL2+Modem Router. Model : TD-W8968. Though, i think all TP-LINK modems will work on these settings for Dhiraagu ADSL.
1- Once, your modem is connected to your ADSL line and PC, open your internet browser and go to modem setting using the address, normally it will be like http://192.168.1.1. Typing this address on your internet browser will bring up your modem's setting. You may need to log-in to go this setting. The default log-in for the setting on almost all the modems will be:
User name: Admin
Password: admin
2- Once you can get to the setting, go to "Quick setup". and choose "ADSL Modem Router Mode" as on below image:
3- Then go to "Next". and then enter VPI/VCI as for VPI 8 and VCI 35 as on below image:
4- Now set ADSL connection type as PPPoE. See image below.
5- Now set your ADSL user name and password on next page as image below:
6- Now setup your wireless setting. Set your desired name as wireless name and password. As shown in below image: When setting up wireless, make sure you setup country as +5GMT region, i.e: India, will be fine. ( Note: you cannot find Maldives in country list )
7- Now check if you have setup as below image:
If everything is ok, just "save" your setting and modem will reboot. After reboot, you should be perfectly connected to Dhiraagu ADSL connect with wifi.
If you still have questions, please leave a comment below.